![]() If no pins are left standing by the foul action of the second ball, the player shall score only the pins downed by the first ball.į. Bonus balls rolled in the gutter on a strike or a spare.ġ. The player will forfeit all pins downed by the foul ball or balls and score only those downed by the balls that were fair. If the first ball is fair and the second and or third ball(s) is/are foul. The player will score zero for the frame.Į. The player will score only the pins fairly downed by the second ball.ĭ. If the first and third balls are foul, but the second is fair. If the first and second balls are foul and come back to knock down pins, the pins shall be reset after each ball, the bowler forfeits both balls and shall count only the pins downed by the third ball.Ĭ. ![]() (The first ball is considered foul even if no pins are downed by it).ī. If the first ball is foul and comes back to down pins, the pins shall be reset, the bowler shall forfeit that ball and count only the pins downed fairly with the next two balls. Only pins downed by fair contact shall count.Ī. GUTTER BALL: If a ball leaves the lane without making fair contact and comes back knocking down pins, the pins downed by that ball shall not count in the scoring. If the ball did not make fair contact, the pins shall not count in the score.ĥ. Should any ball, after making fair contact, for any reason rebound from any object on the deck or pit area, the pins so downed shall count in the scoring.ī. BALL REST ON PLATE: If a ball for any reason comes to rest on the plate, it must be removed by authorized personnel designated by the bowling establishment.Ī. A ball otherwise shall be considered foul and shall suffer the same penalties as for a GUTTER BALL.ģ. FAIR CONTACT: A ball shall be considered to have made fair contact only when it strikes a standing pin or playable wood before it (the ball) leaves the lane. Any ball delivered otherwise is deemed a foul.Ģ. (Playing area also includes approach area). FAIRLY DELIVERED BALL: A ball is fairly delivered when in its forward motion it touches the playing area before the 10ft. (This rule may be superseded by league or tournament regulations).ġ. Secretary/Statistician shall have the authority to make corrections in addition or points on match report sheets. SCORES ARE OFFICIAL: When records are turned in (to secretary/statistician) by captain or official, corrections cannot be made after points are awarded.Ī. RECORDING INDIVIDUAL SCORES: Except for addition errors, it is the bowlers sole responsibility to see that his/her score is recorded properly FRAME by FRAME. SCORING: The score sheet, tele-score and/or automatic scorer shall remain visible to all players at all times. CONSECUTIVE STRIKES OVER THREE: Score as per explanation in rule #6 above.Ĩ. Frame in which third strike is made: Score 10 plus the number downed by the first two balls in the next following frame.ħ. Frame in which second strike is made: Score 20 plus the number downed by the first ball rolled in the second following frame.Ĭ. Frame in which first strike is made: Score 30ī. ![]() THREE CONSECUTIVE STRIKES: Score as follows:Ī. ![]() Frame in which second strike is made: Score 10 plus the number downed by the first two balls in the next following frame.Ħ. Frame in which first strike is made: Score 20 plus the number downed by the first ball rolled in the second following frame.ī. TWO CONSECUTIVE STRIKES: Scores as follows:Ī. To score a spare the bowler receives ten plus the number of pins downed by the next ball rolled by that bowler.ĥ. SPARE: A "spare" occurs when ten pins are downed with the first two balls. To score a strike, the bowler receives ten plus the number of pins downed by the next two balls rolled by that bowler.Ĥ. STRIKE: A "strike" occurs when ten pins are downed with the first ball. NO MARK: When three balls are rolled, the bowler receives credit for the total number of pins knocked down in the frame.ģ. The frame must be completed on the same lane on which the strike or spare is bowled.Ģ. MARK IN FRAME 10: A bowler scoring a strike or a spare in the tenth frame shall immediately roll one or two balls, as necessary, to complete that frame. GAME (string): A game shall consist of ten frames (boxes) in each of which three balls shall be rolled, except when a player scores a strike or spare, called marks.
0 Comments
![]() Select your new wallpaper to enter Preview mode.Tap the type of wallpaper you would like to use.You can choose from Apple's stock imagery, or your own library. Launch the Settings app from your iPhone or iPad Home screen.Choose whether you want to set the wallpaper for your Home screen, Lock screen or both Home and lock.Adjust the positioning and size and then tap Set as wallpaper on the upper left corner of your screen.Choose from the collections of wallpapers included with your phone, or from your photos.Tap the wallpapers icon on the bottom left of your screen.If you don't see Set Desktop Picture in the shortcut menu, you should see a sub-menu named Services instead. If you're using multiple displays, this changes the wallpaper of your primary display only. For Mac OS Xįrom a Finder window or your desktop, locate the image file that you want to use.Ĭontrol-click (or right-click) the file, then choose Set Desktop Picture from the shortcut menu. Right-click on an empty area on the desktop, select "Properties" in the context menu, select the "Desktop" tabĪnd select an image from the ones listed in the scroll window. (the "Browse" buttons or select an image in the viewer). Right-click on the desktop, select "Personalization", click on "Desktop Background" and select the menu you want To select another image stored on your PC, select “Image” ![]() In any case, you will find yourself in the same place. You can select “Personalization” in the context menu.
![]() Kazuha ascension guide is vital in giving him more HP, but leveling up Talents will hand him more power in his battle moves. This drop was previously only available on the Golden Apple Archipelago map. This normal boss is located on Yashiori Island, near where you can find some Dendrobium plants. Instead, his essential drops are Marionette Cores which you can collect after defeating Maguu Kenki. While the wandering samurai is an Anemo user, his ascension does not require Anemo Hypostasis. Instead, he'll need Marionette Cores, which are dropped by the Maguu Kenki, a normal boss in Inazuma. Marionette CoresĮven though he's an Anemo character, Kazuha doesn't use an Anemo Hypostasis drop to ascend. Kazuha materials include Sea Ganoderma which can be collected along Inazuman shores. These blue plants which scatter through Inazuman coastlines’ shallow waters are also ascension materials for Yae Miko.Īpart from farming it in the wild, you may also grow it in the Serenitea Pot or purchase it from Obata whose shop locates in Ritou. Each stock will give 5 Sea Ganoderma, each of which costs 1,000 Mora. This specialty can be found exclusively in Inazuma. Golden Raven Insignias: drops from Treasure Hoarders level 60+.Īlthough you can find this enemy anywhere in Teyvat, they appear more frequently in Liyue ruins.Silver Raven Insignias: drops from Treasure Hoarders level 40+.Treasure Hoarder Insignias: drops from any Treasure Hoarder.You can get three kinds of Insignias from defeating the Treasure Hoarders: One of Genshin Kazuha ascension materials is insignias from Treasure Hoarders. Treasure Hoarder InsigniasĪny character requires some common enemy drop in their ascension and Kazuha is not an exception. You may also come to fight some bosses and Trounce domains as below to get these as specific drops.ĭefeat Anemo Hypostasis to get Anemo items for Kazuha. Gemstones of all kinds are goods and rewards from completing events, daily commissions, and souvenir shops in Mondstadt and Liyue. What materials does Kazuha need? First of all, he will need Vayuda Turquoise gemstones like his Anemo allies - Jean, Xiao, or Sayu. Kazuha ascension guide will require these materials. Besides, the samurai also needs some Sea Ganoderma – an Inazuma specialty, and several enemy drops. Additionally, each point of Elemental Mastery will increase the damage dealt by Kazuha’s normal, charged, plunging, and Ranran Haishin attacks by 0.2%.What materials does Kazuha need? What talent book does Kazuma use? Check out this guide for Kazuha materials! I - Kazuha Ascension MatsĪs Kazuha is an Anemo vision wielder, he needs Vayuda Turquoise for his ascension. Ketsuseki Haku – Kazuha gains an Anemo Infusion for five seconds after using Chihayafuru or Manyou no Ittou.Bansei no Shuu – Increases the level of Manyou no Ittou by three. ![]() Regenerate two energy per second for Kazuha while gliding. Oozora Genpou – When Kazuha’s Energy is lower than 45, he obtains the following effects: Press or Hold Chihayafuru to regenerate three or four energy for Kazuha respectively.Fushuu Kitan – Increases the level of Chihayafuru by three.The Elemental Mastery-increasing effects of this Constellation do not stack. Increases the Elemental Mastery of characters within the field by 200. Yamaarashi Zanshin – The Ruka Akino field created by Manyou no Ittou has the following properties: Increases Kazuha’s own Elemental Mastery by 200.Using Manyou no Ittou resets the CD of Chihayafuru. Senzan Kouhen – Decreases Chihayafuru’s cooldown by ten percent. ![]() Reservations can be made up to 9:00 pm on your day of arrival.They may need to be parked in a separate designated parking area away from your campsite. Additional vehicle permits must be purchased for all other vehicles when you check-in. Parking for one vehicle is included with your campsite permit.No more than six people can occupy a campsite unless these people comprise a single family of parents and their children.The campsite permit holder must be sixteen years of age or older.Full payment of camping fees is required at the time your reservation is made.Anyone attempting to sell a reservation for profit, for example, listing a reservation on social media or buy and sell websites for re-sale for profit, may have their reservation cancelled and all applicable penalty fees will apply. Reservation holders are not permitted to resell any reservation for profit. Transferring (Reselling) Reservations for profit To cancel or change a reservation, login to your reservation account at, or call 1-888-668-PARK (7275).A reservation penalty or administration fee may be applicable.Reservations cannot be changed or cancelled more than four months in advance of your arrival day.This fee covers the cost of providing the Ontario Parks reservation system, including call centre agents, online reservations, and more. A non-refundable reservation fee is required for all reservations and is charged at the time of reservation.If you do not check-in for your reservation please contact the park directly. ![]() Your reservation is guaranteed up until 8am the day following your planned arrival date.To avoid disappointment, reservations are always recommended. Ontario Parks can be busy and are often full during the summer months.Multiple reservations in the same name for the same time period are not allowed. Reservations must be made in the name of the person who will pick up the camping permit.The exception will be during a leap year when reservations with an arrival date of July 29 can first be made on February 29 at 7:00am ET. Reservations with an arrival date of July 29, 30 & 31, will first become available on March 1 at 7:00am ET.For example, you can book January 15 for an arrival date of June 15. Reservations are accepted up to five months in advance of your arrival date. With that in mind, I was hoping the team had some good news regarding this bug, or any update on their progress investigating it. I am starting to get weary myself as I end up encountering the issue every couple of days, and reinstalling my AMD drivers takes roughly 20 minutes each time, which is starting to add up. While I currently am able to play after some fiddling, a lot of players affected by this may not have the time or technical aptitude to implement these workarounds. I'm am also suffering from this, with one of my own workarounds that involves reinstalling my AMD Integrated Graphics drivers (only appears to be a temporary fix). Multi-Region Tom Clancys Rainbow Six Extraction Platinum Save (CUSA15419) (CUSA15434). For newcomers, Rainbow Six Extraction can be a little daunting, especially if youre not familiar with Siege, as the two share a lot of mechanics and characters. Fuel Pods will now regrow after being destroyed by Nomad’s Airjab Launcher.Currently there is a known issue for laptops with AMD APUs that has players receiving a "No Compatible Driver / Hardware Found" error and being unable to start their game. Threads tagged with defense on the PlayerSquared forums (page 1).Smoke Protean’s HP has been reduced in solo excursion. ![]()
![]() Like so many seven-seat SUVs, space in the third row is best reserved for children, but the Sorento is noticeably more spacious than the Land Rover Discovery Sport. The latest Sorento was launched in 2020, so there’s never been a better time to bag a great deal on the previous model. It also comes with a 100,000-mile seven-year warranty from new, so the very latest examples will still have plenty of cover. The price tag, however, is actually far more in line with more mainstream rivals. The Kia Sorento has developed over time into a very smart-looking SUV that could even fool some people into thinking it’s a much more expensive car. All versions come with a long list of standard kit, including alloy wheels, automatic air-conditioning, the Toyota 'Touch2' media system which includes a reversing camera, and a suite of safety systems. Toyota facelifted the Prius+ in 2015, tweaking the styling, upgrading the interior and improving the specification. The other is to fold one of the seats in the third row to create a larger boot. One is to fold the middle seat to create a large armrest. There are two ways to create a six-seat version of the Prius+. ![]() Space in the second row is excellent, and while the seats in the third row are best reserved for children, it’s possible to slide the middle row forward to provide a little more legroom. It is also one of only a handful of 7-seater cars that uses self-charging hybrid technology, meaning it is kinder to the environment and should make for some welcome savings on fuel costs. As the name suggests, the Toyota Prius+ is based on the Prius hybrid. RedBook is not liable for any loss or damages (other than in respect of any liability which may not lawfully be excluded) relating to your use of, or reliance on, this valuation and data.We start with one of the most overlooked seven-seat MPVs you can buy. RedBook is not responsible for all the information provided to it and you should not rely on the data or valuations without making your own independent assessment of the vehicle and other sources of information. Whilst all care is taken in producing the data and valuations, RedBook does not and cannot guarantee or make any representations regarding the use of, or reliance, on it. The valuations are estimates based on average odometer readings and the vehicle being in good condition. RedBook has prepared data and valuations from information gathered from a variety of sources. To the full extent permitted by law, carsales will not be liable for any loss or damage relating to your use of, or reliance on, any information provided through the carsales Research service.Ĭlick here for further information about our Terms & Conditions. While carsales has used its best efforts to provide correct information, it does not and cannot guarantee or make any representation regarding the accuracy or suitability of this information for your needs. Information may take up to 48 hours after it is available to the carsales Network, before it is reflected in the carsales Research section. Information in the carsales Research section is based on carsales internal data and information from Automotive Data Services Pty Ltd (RedBook). # Popular vehicles and their respective rankings based on carsales editorial reviews. Optional extras may also be subject to additional Stamp Duty costs when there is no Drive Away Price displayed. Please confirm price and features with the seller of the vehicle. * If the price does not contain the notation that it is "Drive Away No More to Pay", the price may not include additional costs, such as stamp duty and other government charges. Price Range: Refers to an estimated range of prices that the vehicle may be available for sale (utilising both Price When New (EGC) and Private Price Guide prices, where available). It may vary to a dealer's retail price because the dealer may prepares the vehicle more thoroughly, both mechanically and aesthetically, and may provide a consumer warranty. ** Private Price Guide: Represents what you may expect to buy or sell this vehicle privately. When purchasing a car, always confirm the single figure price with the seller of the actual vehicle. Price When New (EGC): Price shown is a price guide only based on information provided to us by the manufacturer and excludes costs, such as options, dealer delivery, stamp duty, and other government charges that may apply. ![]() The design is relatively simple and unchanged. The straight pin was designed to provide a simple function, secure two or more objects together. It is combined with sulfate to create a solution for coating the pins to keep them from rusting. Nickel is a silvery chemical element extracted from the earth's crust. This lubrication process also removes defects and gives the wire a smooth finish. The dies are coated with grease or soap to protect the wire as it passes through. As it comes off of the last stage of drawing, the steel is coiled. The drawing is undertaken several times until the desired diameter is obtained. Thus the wire is reduced in diameter and increased in length. The cleaned wire is inserted into a drawing block that pulls the wire through a die whose opening is smaller in diameter than that of the wire. To remove this coating, the wire is immersed in an acid bath, then rinsed in water. The heating causes an oxide coating to form on the wire. To create the wire, a bar of steel is heated to a temperature of 2,200☏ (1,200☌), rolled into a long thin rod, coiled, and then allowed to cool. Raw Materialsīlunt wire with an international steel regulation of ISR 9002 is generally used to make straight pins. Today this bag is known as the pin cushion. ![]() To combat this flaw, tailors and seamstresses cleaned the rusted pins by pushing them back and forth into a bag ofĮmery grit. The nickel coating would flake off and the pins would rust. In 1843, with the help of his employees, Howe developed a machine that crimped the paper and then inserted the pins.Īlthough electroplating was invented in the mid-1800s, the process was not perfect. Workers had to manually insert the pins into paper or cards. However, the packaging step slowed down the process. In December of 1835, Howe formed the Howe Manufacturing Company, which was soon turning out about 70,000 pins daily. After the machine was exhibited at the American Institute Fair in New York City, Howe was awarded a silver medal for his contribution to manufacturing. Howe obtained a patent for his machine in June of 1832. Howe enlisted the help of a printer press designer named Robert Hoe. After watching the inmate/patients at the New York Alms House laboriously make pins by hand, he began to explore ideas for a pin-making machine. In spite of not having an official claim to this invention, the pins manufactured in Slocum's Poughkeepsie, New York factory became known as Poughkeepsie pins.Ī physician by profession, Howe also liked to tinker with machinery. ![]() American Samuel Slocum also invented a similar machine but did not patent it. In the early to mid-1800s, American inventors Seth Hunt and John Ireland Howe and British inventors Lemuel Wright and Daniel Foote-Taylor patented machines that produced pins with a solid head from a single piece of wire. These early pin factories produced just under 5,000 pins per day.Īttaching the heads presented a particular challenge. At the end of the process, the pins were polished and inserted into paper packets. In his book, Wealth of Nations, published in 1776, Smith described how one worker drew out the wire, another straightened it, a third cut the wire, the fourth sharpened one end, and another worker ground the opposite end for the attachment of the head. A "paper of pins" became a familiar cultural phrase, signifying the possessions of the simplest nature.Īt the dawn of the Industrial Revolution in the eighteenth century, noted economist Adam Smith employed the imagery of a pin factory as the perfect example of the intricate division of labor. Descriptions of a tailor's equipment from Spanish books dating back to this period included the mention of pins. The craft of tailoring was also well-established by this time. The use of iron wire, still applied during modern times, began as early as the fifteenth century in France. The clothes of medieval Europeans were adorned with pins of many materials including bone, ivory, silver, gold, and brass. In ancient Egypt, pins were crafted of bronze with decorative heads. Since their ancient beginnings, human beings have devised methods for securing cloth together. It is used to fasten pieces of cloth or paper together. A straight pin is a small length of stiff wire with a head at one end and a point at the other end. ![]() Seen largely as a novelty, the few that were sold remained in the Seattle area.Ī vintage Ampeg B-15 amp and speaker cabinet. The instrument was sold with the first purpose-built bass amplifier, the Audiovox Model 936. In 1933, the Audiovox Manufacturing Company was founded by Paul Tutmarc, subsequently the inventor of the first electric bass, the fretted and solid-body Audiovox Model 736 Bass Fiddle, in 1936, which was designed to be played in a guitar-like horizontal manner. ![]() A partial solution was playing slap bass style, slapping the strings against the fingerboard to make a relatively loud percussive sound. In the 1890s and early 1900s, upright bass players performing in bars and brothels often found it difficult to be heard by the audience over louder instruments such as trumpet. While the upright bass is a large instrument, standing about six feet tall (with its endpin extended), due to its low register it is not a loud instrument when played acoustically and because human hearing is less sensitive at low frequencies. The bassists who first sought methods to make their instruments louder were upright bass players. The loudspeakers themselves must also be sturdier to handle the higher power levels and they must be capable of reproducing very low pitches at high sound pressure levels.Ī 1930s era combo amplifier and a Rickenbacker electric upright bass from 1935. Speaker cabinets for bass amps usually incorporate larger loudspeakers (e.g., 15 inches (380 mm) speakers are more common for bass than for electric guitar amps) or more speakers and larger cabinet sizes than those used for the amplification of other instruments. This distinction affects the design of the loudspeakers, the size and design of the speaker cabinet and the design of the preamplifier and amplifier. While bass amps share many features with the guitar amplifiers used for electric guitar, they are distinct from other types of amplification systems, due to the particular challenges associated with low-frequency sound reproduction. Bass amps typically consist of a preamplifier, tone controls, a power amplifier and one or more loudspeakers ("drivers") in a cabinet. Want to know more about how we test music making gear and services at MusicRadar? Hit the link.A Hartke 500 watt amp "head" on top of an Ashdown 4x10" speaker cabinet.Ī bass amplifier (also abbreviated to bass amp) is a musical instrument electronic device that uses electrical power to make lower-pitched instruments such as the bass guitar or double bass loud enough to be heard by the performers and audience. Some players are perfectly happy with a basic amp, especially if they shape their tone via the preamp/tone controls on their instrument or via pedals, while others look for extra functionality like compressors, limiters, or even cab simulators. So, it’s important to ask yourself if you will make use of them all. Other features to considerīass amps these days can come with a number of features, some you may never need. If you were to plug it into an 8-ohm cabinet, you’d only get 200W of power, but if you plugged it into a 2-ohm cabinet, then you’ll damage the speaker, and in the worst-case scenario, cause a fire. ![]() Most bass amps will tell you their resistance either in the manual, online or sometimes on the back of the amp itself.įor example, it may say ‘400W 4 ohms’, which means you’ll need to plug it into a bass cabinet with a resistance of 4 ohms. If you pair a bass amp head with an output impedance higher than the bass cabinet is capable of handling, you will overdrive the speakers, most likely resulting in permanent damage. Impedance, sometimes called resistance, is measured in ohms (Ω). If you’re buying a bass amp head, then you’ll need to make sure it's compatible with your speaker cabinet. Going for a wattage somewhere in the region of 150 to 300W should be more than suitable for small gigs. Sure, that 1000W bass amp head with the 8x10 cabinet will knock your bandmates' socks off at practice, but unless you’re playing stadium tours, it’s probably a bit much.īass amp wattages tend to be higher than that of their guitar amp equivalents, and that’s because lower tones require more power to push the air and generate the sound you hear. Your first consideration when choosing the best bass amp for you should be the wattage. Many of the bass amps listed here are amp heads, which means you’ll need a bass amp cabinet to pair with it. The best bass amp is going to be as personal to you as your own bass guitar heroes and musical tastes, but there are several critical things you’ll need to think about before taking the plunge. MusicRadar's got your back Our team of expert musicians and producers spends hours testing products to help you choose the best music-making gear for you. ![]() He calls his parents he confronts enemies and (figurative) ghosts he grows more and more desperate. “The Disappearer,” who helped both Walt and Saul Goodman during the series - to help him get away, even though he’s come up just a little short of the cash needed to do so. Jesse hunts for money in the home of his former captor Todd (Jesse Plemons). The “present-day” action takes place over what seems like only a day or two. That next move (and the next and the next and the next) form the plot of El Camino, a story about Jesse trying to finally, finally break free of his old life in Albuquerque and find a new one. He heads straight for the home of Skinny Pete (Charles Baker) and Badger (Matthew Lee Jones), where he cowers like a frightened (and very bushy) rabbit, trying to figure out his next move. The movie’s title comes from the car Jesse is driving when he escapes his imprisonment, which is more or less where El Camino begins: With Jesse screaming and driving like a man on fire away from the Aryan Brotherhood compound where he’d been held as a slave, cooking meth. (I won’t give away the plot in detail, but if you prefer to know nothing going in, here’s the point where you should stop and watch before you continue reading.) El Camino starts right after “Felina” ends It just means the fun comes from seeing your favorite characters again, not finally resolving missing pieces that have tortured your sleep for six years.Īnd on that front, El Camino delivers. Breaking Bad’s series finale certainly hasn’t inspired the kind of enduring discussion that followed the end of The Sopranos, for example. And he’s still going to be on the hook for the murder of two federal agents.”īut since then, there hasn’t exactly been a groundswell of speculation over how things played out for Jesse Pinkman (outside of my own staunch belief that he morphed into an animated character, changed his name to Todd, and went to live with a washed-up horse-man actor in Los Angeles). is that they’re going to find this kid’s fingerprints all over this lab and they’re going to find him within a day or a week or a month. Shortly after the finale, Gilligan told GQ that he thought Jesse had probably “got to Alaska, changed his name, and had a new life,” though he admitted that “the most likely thing. It’s not at all clear that anyone was really asking those questions. ![]() Aaron Paul in El Camino: A Breaking Bad Movie. Instead, El Camino answers some questions about what happened to Jesse Pinkman (Aaron Paul) after he escaped from his captivity in a meth lab and who we last saw driving away at top speed, screaming. The tale no longer belongs to Walter White (Bryan Cranston), who died at the end of the series. Subtitled A Breaking Bad Movie and written and directed by series creator Vince Gilligan, El Camino is a two-hour follow-up to the series finale, “Felina,” which aired just over six years ago. Vox-mark vox-mark vox-mark vox-mark vox-mark (And whether Walter was actually acting in Sartrean bad faith is, I think, up for debate.) So in a way, the show made its point: Even if your desire to feel powerful and control others wrecks your life, someone’s going to think of you as their ideal.Įl Camino helps illustrate the opposite, a little. ![]() Then again, Walt was mourned by his fans, or at least the ones who saw him as a hero rather than an anti-hero. Much like Walter White, who by the end of Breaking Bad had betrayed his family, lost his livelihood, and was, well, dead sure, he smiled, but he hadn’t really won in anyone’s eyes but his own. Breaking Bad confronted the notion that you somehow nobly “become” yourself through making “authentic” choices, according to your own self-determined values and your radical freedom.īecause those choices might leave you in a less-than-noble place: busted, hated, dead, mourned by nobody, and with a blazing path of destruction in your wake. To me, Breaking Bad always seemed almost satirical, a tongue-in-cheek exposé of the moral bankruptcy of some existentialists’ philosophy - a counterpoint to the idea that the goal of one’s life is to recognize and exercise one’s total freedom to choose. ![]() I definitely steer to a preference for Real Food. Blasts from the Past Blasts from the PastĪ blog for food and cookery and discussions of weird things like nutrition, restaurant excursions, growing food in my own garden, DIY, and farmsteading/homesteading.Stuffed Eggplant/Aubergine: Farro, Mushroom, Shallot, Celery, with Shawarma Yogurt Topping.Homesteading: Farm and Garden, May 2022.Savory Avocado Smoothie with Blood Orange, Spinach, Scallion, Cilantro.Baby Cuttlefish with Farro, Tomato, Marinated Eggplant, Mushrooms, and Olives.Cubano / Cubanelle Peppers Stuffed with Shrimp, Shiitake and Capers.Bell Peppers Stuffed with Ground Lamb, Topped with Labne.Stuffed Poblano Pepper Boats: Scallops, Shallot, Za’atar.Braised Denver Cut Lamb Ribs, with Yakiniku or Oyster Sauce, and Cumin.Wandering over to be shared with Fiesta Friday (with tasty co-hosts Jhuls The Not So Creative Cook and Rita Parsi Cuisine). And this dish is reasonably fast to make, good on a hot evening. If you do use bread, I’d want to toast it in the skillet. This was quite good! I’m very glad I didn’t try to find some appropriate bread, but that’s up to you. You probably won’t be able to eat this with your hands, so have a knife and fork at the ready. Using a spatula, fold the meat and onions with cheese into a Romaine leaf, arranging everything to your satisfaction.Ĭover with the second leaf and serve. When the butter or oil is hot, add the onions and sauté until translucent, or even a little bit brown.Īdd the beef to the skillet and saute for 5 or 8 minutes, or to your preferred level of done-ness.ĭrape the cheese over for another 30 or so seconds. Take the butter or avo oil, and heat in a skillet on medium. You definitely want to discard any fat cap or fatty regions.Īdd the salt and pepper to the beef, mix a bit, and let sit at room temp for around 20 minutes. If you have a deli slicer (lucky you!) you can probably even get the slices thinner, but not essential. (Let your own tastes be your guide!)Ī hint for the steak – freeze for about 45 minutes prior to slicing, this will help you make thinner slices. Salt and pepper to taste – I used probably 1/16th a teaspoon of the former – if that, and maybe 1/8th teaspoon of the latter.5 ounces / 150 grams of thinly-sliced beef steak (after any fat cap removal).Reheat that part briefly, add the cheese, then plate onto the lettuce and devour. Leftovers: Cook the meat and onions, just don’t assemble. So, well, the end result is that I still haven’t eaten an authentic Philadelphia cheesesteak, but I’m more than happy with my “un-Philly”, anyhow! This seems to be a valid way to make a Philly cheesesteak, but ends up in an optional area for this treat. I was able to eat parts with my hands, but there was that fork option, too. Yes, I’m eating… nice strands of melty cheese. |